(1) A reservoir should be set up with a method to shut out foreign substances such as dust. Example: Filter at a ventilation or a…

Screw, flange, welded, flare, and flareless fittings are available for line connection and equipment setup. In addition, the following fittings are among the available selection.…

This joint transmits working fluids to rotary parts. The rotary and swivel types are available.

This coupling allows connection/disconnection of rubber hoses with one-touch operation.

Rubber hoses are used when metal-tube connection is not allowed, some moving parts are present, and vibration protection is required. The hose consists of an…

These couplings connect a pump shaft and a prime mover. With due consideration to axial misalignment of shafts in hydraulic equipment, the following couplings are…

The valve automatically opens to supply cooling water and decrease the temperature when a temperature detector placed in a reservoir detects that the working fluid…

This valve opens/closes a cooling water supply line. A signal from a thermal switch turns the valve on/off to sustain the working fluid temperature at…

The glove and ball types are available. These valves can be connected with a screwed connection, flange, and manifold. Various combination valves are available as…

These valves are used in maintenance. The following types are among the selections available for line connections: screwed type and flange type. i . Ball…